Blind rivet nuts

Blind rivet nuts have become an indispensable part modern installation engeneering. They allow to

- install bolt threads of different types into ...

  • ... thin or low rigidity components
  • ... hollow sections or other components not accessible from both sides
  • ...components which already have a coated surface,

- connect different components to each other at the same time and

- attach additional parts.

The continous development of new types, forms and dimensions documents the nearly unlimited fields of applications. The Honsel-Group has been one of the leading companies in this progress for decades.

Open and closed versions, possibilities to avoid rotating (knurling, (partial) hexagon shafts or downhead toothing) and flat, countersunk or small countersunk heads - the VVG range is one of the most compact and complete programms available immediately from stock.

Animation blind rivet nuts

Blind Rivet Nut Parallel Shank

The classic form of blind rivet nuts for use in dry and grease-free components.

Blind Rivet Nut Parallel Shank

Multigrip Blind Rivet Nut

The innovative and patented development of the Honsel-Group was in 2007 the first mass-production multigrip blind rivet nut.

Multigrip Blind Rivet Nut

Blind Rivet Nut knurled

The knurled shaft provides a locking device to avoid the turning of the insert in the component.

Blind Rivet Nut knurled

Folding Blind Rivet Nut

Folding blind rivet nuts are constructed for those applications where a high pull-out strength is requested.

Folding Blind Rivet Nut

Hollow Blind Rivet Nut

Slotted blind rivet nuts with threaded insert specially for use in brittle or soft materials such as plastic or perspex.

Hollow Blind Rivet Nut

Blind rivet nut hexagonal

Blind rivet nuts with continuous hexagonal (Hexaform®) or partial hexagonal shank (Hexatop®) are another possibility to avoid the rotation of the fastener in the component as alternative to knurled shafts.

Blind rivet nut hexagonal

Blind rivet nut partial hexagonal

Blind rivet nuts with continuous hexagonal (Hexaform®) or partial hexagonal shank (Hexatop®) are another possibility to avoid the rotation of the fastener in the component as alternative to knurled shafts.

Blind rivet nut partial hexagonal

Technical explanations